6 material differences · fewer than 12
Tractor oneFiat 570 V/E1978–1982No measured PTO figureTractor twoSOMECA 580 (TD)1978–1983No measured PTO figure
Which should you choose?
Read our verdict on the 570 V/E and the 580 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 570 V/E | 580 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | FIAT-IVECO 8035.04.377 | FIAT-IVECO 8035.04.370 (377) | differs |
| Displacement declared | 2.75 L | 2.75 L | — |
| Maximum torque declared | 132 lb·ft · 179 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry FERODO double clutch | Dry FERODO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.5 gpm · 24.6 L/min | 6.5 gpm · 24.6 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,321 lb · 1,960 kg | 5,148 lb · 2,335 kg | +19% 580 (TD) |
| Wheelbase declared | 74.8 in · 1,900 mm | 84.6 in · 2,150 mm | +13% 580 (TD) |
| Length declared | — | 150.0 in · 3,810 mm | — |
| Width declared | 42.5 in · 1,080 mm | 76.0 in · 1,930 mm | +79% 580 (TD) |
| Ground clearance declared | 12.6 in · 320 mm | 19.0 in · 483 mm | +51% 580 (TD) |
| Turning radius, braked declared | — | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 71.9 qt · 68.0 L | 84.5 qt · 80.0 L | +18% 580 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 570 V/E sources
- Source: Traktorenlexikon, “Fiat 570 VE/570 VE/DT”
- Source: Traktorenlexikon, “Someca 570”
SOMECA 580 (TD) sources
- Source: Traktorenlexikon, “Someca 580”
- Source: Traktorenlexikon, “Fiat 580/580 DT”