Fiat 55-66 (DT) vs Hürlimann H-356 (A)

7 material differences · fewer than 12

Tractor one

1985–1992

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the 55-66 (DT) and the H-356 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 55-66 (DT) and Hürlimann H-356 (A), field by field
Field	55-66 (DT)	H-356 (A)	Gap
Engine
Engine power, claimed claimed	54.3 hp	54.2 hp	—
Engine declared	FIAT-IVECO 8035.06.206 or 306	Hürlimann H-916.3 W	differs
Displacement declared	2.71 L	2.75 L	—
Maximum torque declared	128 lb·ft · 174 N·m	136 lb·ft · 185 N·m	+6% H-356 (A)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated dry SLH single-disc clutch as driving clutch	—
Hydraulics & hitch
Pump flow declared	—	8.3 gpm · 31.6 L/min	—
Pressure declared	3,046 psi · 210 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	4,971 lb · 2,255 kg	5,423 lb · 2,460 kg	+9% H-356 (A)
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	85.6 in · 2,175 mm	86.6 in · 2,200 mm	—
Length declared	125.4 in · 3,185 mm	149.6 in · 3,800 mm	+19% H-356 (A)
Width declared	75.2 in · 1,910 mm	73.6 in · 1,870 mm	—
Height declared	90.7 in · 2,305 mm	96.1 in · 2,440 mm	+6% H-356 (A)
Ground clearance declared	19.5 in · 495 mm	14.8 in · 375 mm	+32% 55-66 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	74.0 qt · 70.0 L	—

Source

Source