Fiat 55-56 LM (DT) or John Deere 2155 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 55-56 LM (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2155 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The John Deere 2155 (A) suits loader and hydraulic implement work better on this data: 61% (20.1 L/min / 5.3 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 55-56 LM (DT) | 2155 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 40.4 kW (54.2 hp)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 40.5 kW (54.3 hp)Traktorenlexikon, “John Deere 2155” | Not comparableNot comparable on power at the PTO shaft: the 55-56 LM (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2155 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 55-56 LM (DT) and the 2155 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 55-56 LM (DT) and the 2155 (A). |
| Which pumps more oil for implements? | 32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 52.9 L/min (14.0 gpm)Traktorenlexikon, “John Deere 2155” | AheadThe John Deere 2155 (A) has 61% more hydraulic flow (20.1 L/min / 5.3 gpm) than the Fiat 55-56 LM (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,745 kg (3,847 lb)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 1,640 kg (3,616 lb)Traktorenlexikon, “John Deere 2155” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,140 kg (4,718 lb)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 2,315 kg (5,104 lb)Traktorenlexikon, “John Deere 2155” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 55-56 LM (DT) and the 2155 (A). |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 8 to 16Traktorenlexikon, “John Deere 2155” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 55-56 LM (DT) and the 2155 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiatagri 55-56 LM (DT)” | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 2155” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Fiatagri 55-56 LM (DT)” | 540 rpmTraktorenlexikon, “John Deere 2155” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “John Deere 2155” | No figureNo call on PTO independence: not stated for the 55-56 LM (DT). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri 55-56 LM (DT)” | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 2155” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988– | 1987–1992 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The John Deere 2155 (A) has 61% more hydraulic flow (20.1 L/min / 5.3 gpm) than the Fiat 55-56 LM (DT) (both pump flow, as stated by the source).
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 55-56 LM (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2155 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources