9 material differences · fewer than 12
Tractor oneFiat 500 (DT)1971–1973No measured PTO figureTractor twoJ.I. Case 5301960–1969No measured PTO figure
Which should you choose?
Read our verdict on the 500 (DT) and the 530 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 500 (DT) | 530 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 39.8 hp | +24% 500 (DT) |
| Engine declared | FIAT-IVECO 8035.02.202 | — | — |
| Displacement declared | 2.59 L | — | — |
| Maximum torque declared | 118 lb·ft · 160 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4–21.7 mph · 20–35 km/h | differs |
| Clutch declared | pedal-operated two-stage dry FERODO double clutch | pedal-operated dry Case single-disc clutch type 10 inch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 9.3 gpm · 35.2 L/min | +61% 530 |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,023 lb · 1,825 kg | 3,999 lb · 1,814 kg | — |
| Wheelbase declared | 75.6 in · 1,920 mm | 81.5 in · 2,070 mm | +8% 530 |
| Length declared | 119.1 in · 3,025 mm | 130.0 in · 3,302 mm | +9% 530 |
| Width declared | 62.4–92.9 in · 1,585–2,360 mm | 63.3 in · 1,607 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 18.5 in · 470 mm | +24% 530 |
| Turning radius, braked declared | 9.7 ft · 2.95 m | 7.9 ft · 2.41 m | +22% 500 (DT) |
| Fuel tank declared | 57.1 qt · 54.0 L | 69.2 qt · 65.5 L | +21% 530 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 500 (DT) sources
- Source: Traktorenlexikon, “Fiat 500/500 DT”
- Source: Traktorenlexikon, “Someca 500”
J.I. Case 530 sources
- Source: Traktorenlexikon, “Case 530”