10 material differences · fewer than 12
Tractor oneFiat 50-R1958–1959No measured PTO figureTractor twoPorsche-Diesel Master 4191960–1963No measured PTO figure
Which should you choose?
Read our verdict on the 50-R and the Master 419 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 50-R | Master 419 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.1 hp | — |
| Engine declared | O.M.-FIAT CO 1D-50/Var. 10 | Porsche-Diesel F 419 | differs |
| Displacement declared | 4.16 L | 3.50 L | +19% 50-R |
| Maximum torque declared | 177 lb·ft · 240 N·m | — | — |
| Transmission | |||
| Top speed declared | 14.3 mph · 23 km/h | 12.1 mph · 19.4 km/h | +19% 50-R |
| Clutch declared | pedal-operated dry single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.3 gpm · 20.0 L/min | 5.9 gpm · 22.2 L/min | +11% Master 419 |
| Rear PTO speeds declared | 540 rpm | 579/1135 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,071 lb · 2,300 kg | 4,630 lb · 2,100 kg | +10% 50-R |
| Maximum permissible mass declared | — | 7,771 lb · 3,525 kg | — |
| Wheelbase declared | 74.8 in · 1,900 mm | 85.3 in · 2,166 mm | +14% Master 419 |
| Length declared | 125.2 in · 3,180 mm | 137.0 in · 3,480 mm | +9% Master 419 |
| Width declared | 60.4–91.9 in · 1,535–2,335 mm | 74.3 in · 1,886 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 11.8 ft · 3.61 m | +9% Master 419 |
| Fuel tank declared | 53.9 qt · 51.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 50-R sources
- Source: Traktorenlexikon, “Fiat 50 R”
Porsche-Diesel Master 419 sources
- Source: Traktorenlexikon, “Porsche-Diesel Master N419”