Fiat 50-R vs John Deere-LANZ 710

14 material differences

Tractor one

1958–1959

No measured PTO figure

Tractor two

1965–1967

No measured PTO figure

Which should you choose?

Read our verdict on the 50-R and the 710 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 50-R and John Deere-LANZ 710, field by field
Field	50-R	710	Gap
Engine
Engine power, claimed claimed	49.3 hp	49.3 hp	—
Engine declared	O.M.-FIAT CO 1D-50/Var. 10	John Deere 202 D 23 L	differs
Displacement declared	4.16 L	3.32 L	+25% 50-R
Maximum torque declared	177 lb·ft · 240 N·m	132 lb·ft · 178 N·m	+35% 50-R
Transmission
Top speed declared	14.3 mph · 23 km/h	12.4–15.5 mph · 20–25 km/h	differs
Clutch declared	pedal-operated dry single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	5.3 gpm · 20.0 L/min	4.1 gpm · 15.6 L/min	+28% 50-R
Pressure declared	—	2,162 psi · 149 bar	—
Three-point lift at ends declared	2,094 lb · 950 kg	3,968 lb · 1,800 kg	+89% 710
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,071 lb · 2,300 kg	4,925 lb · 2,234 kg	—
Maximum permissible mass declared	—	7,716 lb · 3,500 kg	—
Wheelbase declared	74.8 in · 1,900 mm	86.6 in · 2,200 mm	+16% 710
Length declared	125.2 in · 3,180 mm	139.0 in · 3,530 mm	+11% 710
Width declared	60.4 in · 1,535 mm	70.5 in · 1,790 mm	+17% 710
Height declared	74.6 in · 1,895 mm	68.9 in · 1,750 mm	+8% 50-R
Ground clearance declared	15.7 in · 400 mm	19.7 in · 500 mm	+25% 710
Turning radius, braked declared	10.8 ft · 3.30 m	10.2 ft · 3.10 m	+6% 50-R
Fuel tank declared	53.9 qt · 51.0 L	74.0 qt · 70.0 L	+37% 710

Source

Source