10 material differences · fewer than 12
Tractor oneFiat 50-66 S (DT)1992–1995No measured PTO figureTractor twoJohn Deere 5300 (A)1992–1997No measured PTO figure
Which should you choose?
Read our verdict on the 50-66 S (DT) and the 5300 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 50-66 S (DT) | 5300 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | FIAT-IVECO 8035.06 | John Deere 3.029 | differs |
| Displacement declared | 2.71 L | 2.94 L | +9% 5300 (A) |
| Maximum torque declared | 130 lb·ft · 176 N·m | 133 lb·ft · 180 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated dry CARRARO single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 9.1 gpm · 34.5 L/min | 11.6 gpm · 43.9 L/min | +27% 5300 (A) |
| Pressure declared | 3,118 psi · 215 bar | 3,408 psi · 235 bar | +9% 5300 (A) |
| Three-point lift, at the coupling points declared | 4,685 lb · 2,125 kg | 3,803 lb · 1,725 kg | +23% 50-66 S (DT) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,685 lb · 2,125 kg | 4,550 lb · 2,064 kg | — |
| Maximum permissible mass declared | 8,488 lb · 3,850 kg | — | — |
| Wheelbase declared | 78.7 in · 1,999 mm | 80.7 in · 2,050 mm | — |
| Length declared | 127.6 in · 3,241 mm | 139.4 in · 3,541 mm | +9% 5300 (A) |
| Width declared | 60.6–84.3 in · 1,540–2,140 mm | 72.7–88.5 in · 1,846–2,249 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 19.3 in · 490 mm | +8% 5300 (A) |
| Turning radius, braked declared | — | 9.8 ft · 3.00 m | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 72.0 qt · 68.1 L | +7% 50-66 S (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 50-66 S (DT) sources
- Source: Traktorenlexikon, “Fiatagri 50-66S/50-66 DTS”
- Source: Traktorenlexikon, “Fiat 50-66/50-66 DT”
John Deere 5300 (A) sources
- Source: Traktorenlexikon, “John Deere 5300 (USA)”
- Source: Traktorenlexikon, “John Deere 5200 (USA)”