12 material differences
Tractor oneFiat 480 (DT)1973–1984No measured PTO figureTractor twoGüldner G 50 (Gotland)1962No measured PTO figure
Which should you choose?
Read our verdict on the 480 (DT) and the G 50 (Gotland) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 480 (DT) | G 50 (Gotland) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 47.1 hp | — |
| Engine declared | FIAT-IVECO 8035.02.200 (300) | Güldner 4 L 79 | differs |
| Displacement declared | 2.59 L | 3.14 L | +21% G 50 (Gotland) |
| Maximum torque declared | 112 lb·ft · 152 N·m | 127 lb·ft · 173 N·m | +14% G 50 (Gotland) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 12.4–18.6 mph · 20–30 km/h | differs |
| Clutch declared | Pedal operated dry FERODO double clutch type 10 inches | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 22.0 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | 2,489 psi · 172 bar | +16% 480 (DT) |
| Rear PTO speeds declared | 540 rpm | 572/1120 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,836 lb · 1,740 kg | 5,908 lb · 2,680 kg | +54% G 50 (Gotland) |
| Wheelbase declared | 75.6 in · 1,920 mm | 86.6 in · 2,200 mm | +15% G 50 (Gotland) |
| Length declared | 118.1 in · 2,999 mm | 144.1 in · 3,660 mm | +22% G 50 (Gotland) |
| Width declared | 65.4–89.3 in · 1,660–2,268 mm | 72.1 in · 1,832 mm | differs |
| Ground clearance declared | 14.6 in · 371 mm | 16.3 in · 415 mm | +12% G 50 (Gotland) |
| Turning radius, braked declared | 9.7 ft · 2.95 m | — | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 68.7 qt · 65 L | +20% G 50 (Gotland) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 480 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 480/480 DT”
Güldner G 50 (Gotland) sources
Source
- Source: Traktorenlexikon, “Güldner G 50 Gotland”