2 material differences · fewer than 12
Tractor oneFiat 480 (DT)1973–1984No measured PTO figureTractor twoFiat 480 Special (DT)1977–1979No measured PTO figure
Which should you choose?
Read our verdict on the 480 (DT) and the 480 Special (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 14 fields identical or within 5%, which is not counted as material
| Field | 480 (DT) | 480 Special (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 47.3 hp | — |
| Engine declared | FIAT-IVECO 8035.02.200 (300) | FIAT-IVECO 8035.02.200 (300) | — |
| Displacement declared | 2.59 L | 2.59 L | — |
| Maximum torque declared | 112 lb·ft · 152 N·m | 112 lb·ft · 152 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry FERODO double clutch type 10 inches | Dry FERODO double clutch, type 11 inches | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,836 lb · 1,740 kg | 4,189 lb · 1,900 kg | +9% 480 Special (DT) |
| Wheelbase declared | 75.6 in · 1,920 mm | 76.9 in · 1,953 mm | — |
| Length declared | 118.1 in · 2,999 mm | 119.0 in · 3,023 mm | — |
| Width declared | 65.4–89.3 in · 1,660–2,268 mm | 65.4–89.3 in · 1,660–2,268 mm | — |
| Ground clearance declared | 14.6 in · 371 mm | 14.6 in · 371 mm | — |
| Turning radius, braked declared | 9.7 ft · 2.95 m | 9.7 ft · 2.95 m | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 480 (DT) sources
- Source: Traktorenlexikon, “Fiat 480/480 DT”
Fiat 480 Special (DT) sources
- Source: Traktorenlexikon, “Fiat 480-S/480-S DT”
- Source: Traktorenlexikon, “Fiat 480/480 DT”