Fiat 466 (DT) or Massey Ferguson MF 4215 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Fiat 466 (DT): three-point lift.

  • The Fiat 466 (DT) suits loader and hydraulic implement work better on this data: 21% (460 kg / 1,014 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 466 (DT) and Massey Ferguson MF 4215 (A), with the call on each
Question466 (DT)MF 4215 (A)Call
Which puts more power through the PTO shaft?31.8 kW (42.6 hp)Traktorenlexikon, “Fiat 466/466 DT”31.7 kW (42.5 hp)Traktorenlexikon, “Massey Ferguson MF 4215”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 466 (DT) and the MF 4215 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 466 (DT) and the MF 4215 (A).
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 466 (DT) and the MF 4215 (A).
Which lifts more on the three-point hitch?2,600 kg (5,732 lb)Traktorenlexikon, “Fiat 466/466 DT”2,140 kg (4,718 lb)Traktorenlexikon, “Massey Ferguson MF 4215”AheadThe Fiat 466 (DT) has 21% more lift (460 kg / 1,014 lb) than the Massey Ferguson MF 4215 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,280 kg (5,027 lb)Traktorenlexikon, “Fiat 466/466 DT”2,385 kg (5,258 lb)Traktorenlexikon, “Massey Ferguson MF 4215”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 466 (DT) and the MF 4215 (A).
Which has the wider choice of gears?12 to 20Traktorenlexikon, “Fiat 466/466 DT”8 to 12Traktorenlexikon, “Massey Ferguson MF 4215”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 466 (DT) and the MF 4215 (A).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 466/466 DT”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 4215”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Fiat 466/466 DT”540 rpmTraktorenlexikon, “Massey Ferguson MF 4215”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 466/466 DT”No figureNo call on PTO independence: not stated for the MF 4215 (A).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 466/466 DT”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 4215”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1982–19861997–2001Ahead (a fact, not an advantage)The Massey Ferguson MF 4215 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 466 (DT) has 21% more lift (460 kg / 1,014 lb) than the Massey Ferguson MF 4215 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 4215 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources