Fiat 466 (DT) vs Massey Ferguson MF 4215 (A)

9 material differences · fewer than 12

Tractor one

1982–1986

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 466 (DT) and the MF 4215 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 466 (DT) and Massey Ferguson MF 4215 (A), field by field
Field	466 (DT)	MF 4215 (A)	Gap
Engine
Engine power, claimed claimed	53.2 hp	51.4 hp	—
Engine declared	FIAT-IVECO 8035.02.276 or 376	Perkins 903.27	differs
Displacement declared	2.59 L	2.70 L	—
Maximum torque declared	125 lb·ft · 170 N·m	136 lb·ft · 184 N·m	+8% MF 4215 (A)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	dry O.M.G, VALEO or LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pressure declared	3,336–3,481 psi · 230–240 bar	2,031 psi · 140 bar	differs
Three-point lift at ends declared	5,732 lb · 2,600 kg	4,718 lb · 2,140 kg	+21% 466 (DT)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,027 lb · 2,280 kg	5,258 lb · 2,385 kg	—
Wheelbase declared	85.6 in · 2,175 mm	83.9 in · 2,130 mm	—
Length declared	126.9 in · 3,222 mm	149.0 in · 3,785 mm	+17% MF 4215 (A)
Width declared	75.6 in · 1,920 mm	78.0 in · 1,982 mm	—
Height declared	93.3 in · 2,370 mm	99.0 in · 2,515 mm	+6% MF 4215 (A)
Ground clearance declared	19.5 in · 495 mm	8.3 in · 210 mm	+136% 466 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	77.1 qt · 73.0 L	90.9 qt · 86.0 L	+18% MF 4215 (A)

Source

Source