9 material differences · fewer than 12
Tractor oneFiat 455 C1968–1975No measured PTO figureTractor twoZETOR Super-P1956–1958No measured PTO figure
Which should you choose?
Read our verdict on the 455 C and the Super-P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 455 C | Super-P | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 43.4 hp | 41.4 hp | — |
| Engine declared | FIAT-IVECO 8035.02.210 or 310 | — | — |
| Displacement declared | 2.59 L | — | — |
| Maximum torque declared | — | 152 lb·ft · 206 N·m | — |
| Transmission | |||
| Top speed declared | 6.8 mph · 11 km/h | 9.3 mph · 15 km/h | +36% Super-P |
| Clutch declared | Hand lever operated dry single disc clutch with dead center engagement | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.7 gpm · 17.8 L/min | 3.3 gpm · 12.5 L/min | +42% 455 C |
| Pressure declared | 2,843 psi · 196 bar | 1,707 psi · 118 bar | +66% 455 C |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,718 lb · 2,140 kg | 9,910 lb · 4,495 kg | +110% Super-P |
| Wheelbase declared | 50.9 in · 1,293 mm | 67.1 in · 1,705 mm | +32% Super-P |
| Length declared | 105.3 in · 2,675 mm | 131.1 in · 3,330 mm | +24% Super-P |
| Width declared | 50.9 in · 1,292 mm | 64.6 in · 1,640 mm | +27% Super-P |
| Ground clearance declared | 9.8 in · 250 mm | 13.4 in · 340 mm | +36% Super-P |
| Fuel tank declared | 57.1 qt · 54.0 L | 71.9 qt · 68.0 L | +26% Super-P |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 455 C sources
- Source: Traktorenlexikon, “Fiat 455 C”
ZETOR Super-P sources
- Source: Traktorenlexikon, “Zetor Super P”