Fiat 450 SV/SE vs UTB U-453 DT
13 material differences
Which should you choose?
Read our verdict on the 450 SV/SE and the U-453 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 450 SV/SE | U-453 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT-IVECO 8035.01.309 | UTB D-115.000 | differs |
| Displacement declared | 2.34 L | 2.40 L | — |
| Maximum torque declared | 108 lb·ft · 146 N·m | 97 lb·ft · 132 N·m | +11% 450 SV/SE |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Dry UTB double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.2 gpm · 23.4 L/min | 9.0 gpm · 34.0 L/min | +45% U-453 DT |
| Pressure declared | 2,843 psi · 196 bar | 2,031 psi · 140 bar | +40% 450 SV/SE |
| Three-point lift at ends declared | 3,307 lb · 1,500 kg | 3,594 lb · 1,630 kg | +9% U-453 DT |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,858 lb · 1,750 kg | 6,393 lb · 2,900 kg | +66% U-453 DT |
| Wheelbase declared | 75.6 in · 1,920 mm | 83.9 in · 2,130 mm | +11% U-453 DT |
| Length declared | 122.8 in · 3,120 mm | 141.1 in · 3,585 mm | +15% U-453 DT |
| Width declared | 38.6–43.3 in · 980–1,100 mm | 70.4 in · 1,788 mm | differs |
| Height declared | 50.8 in · 1,290 mm | 94.5 in · 2,400 mm | +86% U-453 DT |
| Ground clearance declared | 13.4 in · 340 mm | 9.1 in · 230 mm | +48% 450 SV/SE |
| Turning radius, braked declared | 9.4 ft · 2.85 m | — | — |
| Fuel tank declared | 57.1 qt · 54.0 L | 65.5 qt · 62.0 L | +15% U-453 DT |
Fiat 450 SV/SE sources
Source
- Source: Traktorenlexikon, “Fiat 450 SE/SV”
- Source: Traktorenlexikon, “Someca 450 S”
UTB U-453 DT sources
Source
- Source: Traktorenlexikon, “UTB U 453 DT”