Fiat 450/N (DT) vs UTB 445 DTC
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 450/N (DT) and the 445 DTC → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 450/N (DT) | 445 DTC | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 42.4 hp | 42.4 hp | — |
| Engine declared | FIAT-IVECO 8035.01.300 | UTB D-115 | differs |
| Displacement declared | 2.34 L | 2.34 L | — |
| Maximum torque declared | 103 lb·ft · 140 N·m | 103 lb·ft · 140 N·m | — |
| Transmission | |||
| Top speed declared | 16.8 mph · 27 km/h | 15.5 mph · 25 km/h | +8% 450/N (DT) |
| Clutch declared | — | pedal-operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 21.8 L/min | 5.8 gpm · 21.8 L/min | — |
| Pressure declared | 2,843 psi · 196 bar | — | — |
| Three-point lift at ends declared | 2,866 lb · 1,300 kg | 3,197 lb · 1,450 kg | +12% 445 DTC |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,748 lb · 1,700 kg | 4,850 lb · 2,200 kg | +29% 445 DTC |
| Wheelbase declared | 75.6 in · 1,920 mm | 72.8 in · 1,850 mm | — |
| Length declared | 126.0 in · 3,200 mm | 115.0 in · 2,920 mm | +10% 450/N (DT) |
| Width declared | 62.4 in · 1,585 mm | 60.8 in · 1,545 mm | — |
| Height declared | 67.5 in · 1,715 mm | 78.7 in · 2,000 mm | +17% 445 DTC |
| Ground clearance declared | 14.6 in · 370 mm | 13.4 in · 340 mm | +9% 450/N (DT) |
| Turning radius, braked declared | 9.7 ft · 2.95 m | 14.8 ft · 4.50 m | +53% 445 DTC |
| Fuel tank declared | 57.1 qt · 54.0 L | 57.1 qt · 54.0 L | — |
Fiat 450/N (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 450-N/450-N DT”
- Source: Traktorenlexikon, “Someca 450 N”
UTB 445 DTC sources
Source
- Source: Traktorenlexikon, “UTB U 445 DT”
- Source: Traktorenlexikon, “UTB U 445”