10 material differences · fewer than 12
Tractor oneFiat 45-66 V (DT/V)1985–1992No measured PTO figureTractor twoZETOR 50111980–1984No measured PTO figure
Which should you choose?
Read our verdict on the 45-66 V (DT/V) and the 5011 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 45-66 V (DT/V) | 5011 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | FIAT-IVECO 8035.06.220 or 320 | ZBROJORKA Z-5001 | differs |
| Displacement declared | 2.71 L | 2.70 L | — |
| Maximum torque declared | 107 lb·ft · 144.6 N·m | 108 lb·ft · 147 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 45-66 V (DT/V) |
| Clutch declared | Dry Valeo or LuK double clutch | Pedal-operated dry Zbrojovka double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 6.2 gpm · 23.3 L/min | — |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 5,886 lb · 2,670 kg | +75% 5011 |
| Wheelbase declared | 72.6 in · 1,845 mm | 79.7 in · 2,025 mm | +10% 5011 |
| Length declared | 113.6 in · 2,885 mm | 132.9 in · 3,375 mm | +17% 5011 |
| Width declared | 53.5 in · 1,360 mm | 71.3 in · 1,810 mm | +33% 5011 |
| Ground clearance declared | 12.8 in · 325 mm | 17.3 in · 440 mm | +35% 5011 |
| Turning radius, braked declared | — | 10.1 ft · 3.09 m | — |
| Fuel tank declared | 52.8 qt · 50.0 L | 49.7 qt · 47.0 L | +6% 45-66 V (DT/V) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 45-66 V (DT/V) sources
- Source: Traktorenlexikon, “Fiat 45-66 V/45-66 V/DT”
ZETOR 5011 sources
- Source: Traktorenlexikon, “Zetor 5011”