Fiat 440 (DT) vs John Deere 2000 (A)

14 material differences

Tractor one

1982

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 440 (DT) and the 2000 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 440 (DT) and John Deere 2000 (A), field by field
Field	440 (DT)	2000 (A)	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	FIAT-IVECO 8035.02	ZETOR 5201	differs
Displacement declared	2.59 L	2.70 L	—
Maximum torque declared	114 lb·ft · 154 N·m	117 lb·ft · 158 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 2000 (A)
Clutch declared	dry FEREDO double clutch type 11/11"	Dry Zetor double clutch	differs
Hydraulics & hitch
Pump flow declared	7.1 gpm · 26.8 L/min	8.5 gpm · 32.0 L/min	+19% 2000 (A)
Pressure declared	2,843 psi · 196 bar	1,160 psi · 80 bar	+145% 440 (DT)
Three-point lift at ends declared	3,858 lb · 1,750 kg	4,475 lb · 2,030 kg	+16% 2000 (A)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,189 lb · 1,900 kg	6,382 lb · 2,895 kg	+52% 2000 (A)
Maximum permissible mass declared	—	12,125 lb · 5,500 kg	—
Wheelbase declared	76.8 in · 1,950 mm	83.2 in · 2,114 mm	+8% 2000 (A)
Length declared	126.8 in · 3,220 mm	143.3 in · 3,640 mm	+13% 2000 (A)
Width declared	65.0 in · 1,650 mm	70.9 in · 1,800 mm	+9% 2000 (A)
Height declared	89.8 in · 2,280 mm	103.9 in · 2,640 mm	+16% 2000 (A)
Ground clearance declared	13.8 in · 350 mm	14.8 in · 375 mm	+7% 2000 (A)
Turning radius, braked declared	9.7 ft · 2.95 m	—	—
Fuel tank declared	57.1 qt · 54.0 L	74.0 qt · 70.0 L	+30% 2000 (A)

Source

Source