Fiat 415 (DT) vs WARCHALOWSKI-MC CORMICK WT-45 A

9 material differences · fewer than 12

Tractor one

1963–1968

No measured PTO figure

Tractor two

1968–1970

No measured PTO figure

Which should you choose?

Read our verdict on the 415 (DT) and the WT-45 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 415 (DT) and WARCHALOWSKI-MC CORMICK WT-45 A, field by field
Field	415 (DT)	WT-45 A	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	FIAT 615.000	INTERNATIONAL HARVESTER BD-154	differs
Displacement declared	2.27 L	2.52 L	+11% WT-45 A
Maximum torque declared	101 lb·ft · 137 N·m	124 lb·ft · 168 N·m	+23% WT-45 A
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% WT-45 A
Clutch declared	—	Pedal-operated, two-stage dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Pump flow declared	4.8 gpm · 18.0 L/min	—	—
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	—	3,968 lb · 1,800 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,505 lb · 1,590 kg	4,299 lb · 1,950 kg	+23% WT-45 A
Wheelbase declared	75.8 in · 1,925 mm	79.3 in · 2,015 mm	—
Length declared	119.7 in · 3,040 mm	131.9 in · 3,350 mm	+10% WT-45 A
Width declared	64.0 in · 1,625 mm	61.0 in · 1,550 mm	—
Height declared	73.6 in · 1,870 mm	57.5 in · 1,460 mm	+28% 415 (DT)
Ground clearance declared	18.9 in · 480 mm	15.4 in · 390 mm	+23% 415 (DT)
Turning radius, braked declared	10.4 ft · 3.18 m	—	—
Fuel tank declared	51.8 qt · 49.0 L	43.3 qt · 41.0 L	+20% 415 (DT)

Source

Source