Fiat 415 (DT) vs SOMECA SOM-45

10 material differences · fewer than 12

Tractor one

1963–1968

No measured PTO figure

Tractor two

1961–1963

No measured PTO figure

Which should you choose?

Read our verdict on the 415 (DT) and the SOM-45 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 415 (DT) and SOMECA SOM-45, field by field
Field	415 (DT)	SOM-45	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	FIAT 615.000	O.M.-FIAT CO 1D-45	differs
Displacement declared	2.27 L	4.16 L	+83% SOM-45
Maximum torque declared	101 lb·ft · 137 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	13.7 mph · 22 km/h	+14% 415 (DT)
Clutch declared	—	Pedal operated dry double clutch	—
Hydraulics & hitch
Pump flow declared	4.8 gpm · 18.0 L/min	4.0 gpm · 15.0 L/min	+20% 415 (DT)
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	—	2,425 lb · 1,100 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,505 lb · 1,590 kg	5,494 lb · 2,492 kg	+57% SOM-45
Wheelbase declared	75.8 in · 1,925 mm	80.0 in · 2,032 mm	+6% SOM-45
Length declared	119.7 in · 3,040 mm	132.5 in · 3,365 mm	+11% SOM-45
Width declared	64.0 in · 1,625 mm	68.7 in · 1,745 mm	+7% SOM-45
Height declared	73.6 in · 1,870 mm	72.0 in · 1,829 mm	—
Ground clearance declared	18.9 in · 480 mm	14.3 in · 364 mm	+32% 415 (DT)
Turning radius, braked declared	10.4 ft · 3.18 m	10.8 ft · 3.30 m	—
Fuel tank declared	51.8 qt · 49.0 L	59.2 qt · 56.0 L	+14% SOM-45

Source

Source