Fiat 411 C (CI) vs ZETOR Super-P

11 material differences · fewer than 12

Tractor one

1958–1964

No measured PTO figure

Tractor two

1956–1958

No measured PTO figure

Which should you choose?

Read our verdict on the 411 C (CI) and the Super-P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 411 C (CI) and ZETOR Super-P, field by field
Field	411 C (CI)	Super-P	Gap
Engine
Engine power, claimed claimed	39.4 hp	41.4 hp	—
Engine declared	FIAT 615.000	—	—
Displacement declared	2.27 L	—	—
Maximum torque declared	103 lb·ft · 140 N·m	152 lb·ft · 206 N·m	+47% Super-P
Transmission
Top speed declared	6.2 mph · 10.0 km/h	9.3 mph · 15 km/h	+50% Super-P
Hydraulics & hitch
Pump flow declared	4.4 gpm · 16.5 L/min	3.3 gpm · 12.5 L/min	+32% 411 C (CI)
Pressure declared	2,843 psi · 196 bar	1,707 psi · 118 bar	+66% 411 C (CI)
Three-point lift at ends declared	—	2,646 lb · 1,200 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	5,291 lb · 2,400 kg	9,910 lb · 4,495 kg	+87% Super-P
Wheelbase declared	51.9 in · 1,318 mm	67.1 in · 1,705 mm	+29% Super-P
Length declared	99.6 in · 2,530 mm	131.1 in · 3,330 mm	+32% Super-P
Width declared	56.7 in · 1,440 mm	64.6 in · 1,640 mm	+14% Super-P
Height declared	51.2 in · 1,300 mm	86.6 in · 2,200 mm	+69% Super-P
Ground clearance declared	10.6 in · 270 mm	13.4 in · 340 mm	+26% Super-P
Fuel tank declared	51.8 qt · 49.0 L	71.9 qt · 68.0 L	+39% Super-P

Source

Source