Fiat 400 (DT) vs International Harvester FU-265 D

10 material differences · fewer than 12

Tractor one

1968–1974

No measured PTO figure

Tractor two

1959–1961

No measured PTO figure

Which should you choose?

Read our verdict on the 400 (DT) and the FU-265 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 400 (DT) and International Harvester FU-265 D, field by field
Field	400 (DT)	FU-265 D	Gap
Engine
Engine power, claimed claimed	34.5 hp	34.5 hp	—
Engine declared	FIAT-IVECO 8035.01.201	INTERNATIONAL HARVESTER FD-136	differs
Displacement declared	2.34 L	2.23 L	—
Maximum torque declared	103 lb·ft · 140 N·m	100 lb·ft · 135 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	13.0 mph · 21 km/h	+19% 400 (DT)
Clutch declared	Pedal-operated two-stage dry Feredo double clutch	—	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	4.9 gpm · 18.6 L/min	+17% 400 (DT)
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	2,866 lb · 1,300 kg	—	—
Rear PTO speeds declared	540 rpm	549 rpm	differs
Weight & dimensions
Unladen weight declared	3,750 lb · 1,701 kg	4,012 lb · 1,820 kg	+7% FU-265 D
Wheelbase declared	75.6 in · 1,920 mm	69.7 in · 1,770 mm	+8% 400 (DT)
Length declared	124.8 in · 3,169 mm	116.1 in · 2,950 mm	+7% 400 (DT)
Width declared	62.4 in · 1,585 mm	81.9 in · 2,080 mm	+31% FU-265 D
Height declared	67.5 in · 1,715 mm	66.9 in · 1,700 mm	—
Ground clearance declared	14.6 in · 370 mm	13.8 in · 350 mm	+6% 400 (DT)
Turning radius, braked declared	9.7 ft · 2.95 m	8.6 ft · 2.62 m	+13% 400 (DT)
Fuel tank declared	—	45.4 qt · 43.0 L	—

Source

Source