Fiat 350 / Spezial (DT) vs International Harvester 240 Utility

11 material differences · fewer than 12

Tractor one

1968–1974

No measured PTO figure

Tractor two

1958–1961

No measured PTO figure

Which should you choose?

Read our verdict on the 350 / Spezial (DT) and the 240 Utility → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 350 / Spezial (DT) and International Harvester 240 Utility, field by field
Field	350 / Spezial (DT)	240 Utility	Gap
Engine
Engine power, claimed claimed	32.6 hp	31.5 hp	—
Engine declared	FIAT-IVECO 8025.02.001	INTERNATIONAL HARVESTER C-123	differs
Displacement declared	1.73 L	2.01 L	+16% 240 Utility
Maximum torque declared	83 lb·ft · 112 N·m	101 lb·ft · 137 N·m	+22% 240 Utility
Transmission
Top speed declared	15.5 mph · 25 km/h	14.3 mph · 23 km/h	+9% 350 / Spezial (DT)
Clutch declared	—	Pedal-operated dry Rockford single-plate clutch	—
Hydraulics & hitch
Pump flow declared	3.8 gpm · 14.4 L/min	6.0 gpm · 22.8 L/min	+58% 240 Utility
Pressure declared	2,843 psi · 196 bar	—	—
Three-point lift at ends declared	1,709 lb · 775 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,120 lb · 1,415 kg	3,638 lb · 1,650 kg	+17% 240 Utility
Wheelbase declared	69.9 in · 1,775 mm	75.0 in · 1,905 mm	+7% 240 Utility
Length declared	107.5 in · 2,730 mm	116.0 in · 2,946 mm	+8% 240 Utility
Width declared	58.3 in · 1,480 mm	63.0 in · 1,600 mm	+8% 240 Utility
Height declared	55.1 in · 1,400 mm	58.0 in · 1,473 mm	—
Ground clearance declared	18.5 in · 470 mm	17.0 in · 432 mm	+9% 350 / Spezial (DT)
Turning radius, braked declared	9.0 ft · 2.75 m	—	—
Fuel tank declared	35.9 qt · 34.0 L	64.8 qt · 61.3 L	+80% 240 Utility

Source

Source