Fiat 300 (DT) vs Steyr 188

13 material differences

Tractor one

1971–1978

No measured PTO figure

Tractor two

1960–1966

No measured PTO figure

Which should you choose?

Read our verdict on the 300 (DT) and the 188 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 300 (DT) and Steyr 188, field by field
Field	300 (DT)	188	Gap
Engine
Engine power, claimed claimed	30.6 hp	27.6 hp	+11% 300 (DT)
Engine declared	FIAT-IVECO 8025.01.200 or 300	Steyr WD-209	differs
Displacement declared	1.73 L	1.99 L	+15% 188
Maximum torque declared	71 lb·ft · 96 N·m	87 lb·ft · 118 N·m	+23% 188
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 188
Clutch declared	Pedal-operated dry FIAT single-plate clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	—	—
Pressure declared	—	2,134 psi · 147 bar	—
Three-point lift at ends declared	1,433 lb · 650 kg	2,425 lb · 1,100 kg	+69% 188
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	3,064 lb · 1,390 kg	+14% 188
Wheelbase declared	66.9 in · 1,700 mm	72.8 in · 1,850 mm	+9% 188
Length declared	107.9 in · 2,740 mm	124.4 in · 3,160 mm	+15% 188
Width declared	60.6 in · 1,540 mm	64.7 in · 1,644 mm	+7% 188
Height declared	61.8 in · 1,570 mm	57.1 in · 1,450 mm	+8% 300 (DT)
Ground clearance declared	18.5 in · 470 mm	17.3 in · 440 mm	+7% 300 (DT)
Turning radius, braked declared	9.5 ft · 2.89 m	9.7 ft · 2.95 m	—
Fuel tank declared	30.6 qt · 29.0 L	42.3 qt · 40 L	+38% 188

Source

Source