Fiat 300 (DT) vs Ford 1900 (A)

12 material differences

Tractor one

1971–1978

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 300 (DT) and the 1900 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 300 (DT) and Ford 1900 (A), field by field
Field	300 (DT)	1900 (A)	Gap
Engine
Engine power, claimed claimed	30.6 hp	28.3 hp	+8% 300 (DT)
Engine declared	FIAT-IVECO 8025.01.200 or 300	ISHIKAWAJIMA-SHIBAURA LEM-853	differs
Displacement declared	1.73 L	1.43 L	+20% 300 (DT)
Maximum torque declared	71 lb·ft · 96 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	13.7 mph · 22 km/h	+14% 300 (DT)
Clutch declared	Pedal-operated dry FIAT single-plate clutch	Pedal-operated dry DAIKIN dual clutch	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	7.8 gpm · 29.5 L/min	+217% 1900 (A)
Three-point lift at ends declared	1,433 lb · 650 kg	3,810 lb · 1,728 kg	+166% 1900 (A)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	2,690 lb · 1,220 kg	—
Wheelbase declared	66.9 in · 1,700 mm	63.0 in · 1,600 mm	+6% 300 (DT)
Length declared	107.9 in · 2,740 mm	118.5 in · 3,010 mm	+10% 1900 (A)
Width declared	60.6 in · 1,540 mm	57.5 in · 1,460 mm	+5% 300 (DT)
Height declared	61.8 in · 1,570 mm	86.2 in · 2,190 mm	+39% 1900 (A)
Ground clearance declared	18.5 in · 470 mm	15.0 in · 380 mm	+24% 300 (DT)
Turning radius, braked declared	9.5 ft · 2.89 m	7.9 ft · 2.40 m	+20% 300 (DT)
Fuel tank declared	30.6 qt · 29.0 L	30.7 qt · 29.1 L	—

Source

Source