Fiat 250 (DT) vs International Harvester D-324 Standard

8 material differences · fewer than 12

Tractor one

1968–1974

No measured PTO figure

Tractor two

1958–1962

No measured PTO figure

Which should you choose?

Read our verdict on the 250 (DT) and the D-324 Standard → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat 250 (DT) and International Harvester D-324 Standard, field by field
Field	250 (DT)	D-324 Standard	Gap
Engine
Engine power, claimed claimed	24.7 hp	23.7 hp	—
Engine declared	FIAT 852.000	INTERNATIONAL-HARVESTER DD-111	differs
Displacement declared	1.56 L	1.83 L	+17% D-324 Standard
Maximum torque declared	58 lb·ft · 79 N·m	73 lb·ft · 99 N·m	+25% D-324 Standard
Transmission
Top speed declared	15.5 mph · 25 km/h	11.8 mph · 19 km/h	+32% 250 (DT)
Clutch declared	dry FIAT single-plate clutch operated by pedal	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	—	—
Three-point lift at ends declared	1,323 lb · 600 kg	1,323 lb · 600 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	3,386 lb · 1,536 kg	+26% D-324 Standard
Wheelbase declared	66.9 in · 1,700 mm	70.0 in · 1,779 mm	—
Length declared	107.9 in · 2,740 mm	108.3 in · 2,750 mm	—
Width declared	50.8 in · 1,290 mm	64.6 in · 1,640 mm	+27% D-324 Standard
Height declared	61.8 in · 1,570 mm	61.0 in · 1,550 mm	—
Ground clearance declared	18.5 in · 470 mm	15.1 in · 383 mm	+23% 250 (DT)
Turning radius, braked declared	9.2 ft · 2.80 m	9.2 ft · 2.80 m	—
Fuel tank declared	30.6 qt · 29.0 L	31.7 qt · 30.0 L	—

Source

Source