13 material differences
Tractor oneFiat 211 R (A)1958–1964No measured PTO figureTractor twoHanomag C 2201959–1960No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (50%); the drive differs (Two-wheel or four-wheel drive; 2WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 211 R (A) | C 220 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 19.7 hp | 19.6 hp | — |
| Engine declared | FIAT 614.010 | Hanomag D 621 | differs |
| Displacement declared | 1.14 L | 1.02 L | +11% 211 R (A) |
| Maximum torque declared | 49 lb·ft · 66.0 N·m | 58 lb·ft · 78 N·m | +18% C 220 |
| Transmission | |||
| Top speed declared | 13.7 mph · 22 km/h | 12.3 mph · 19.8 km/h | +11% 211 R (A) |
| Clutch declared | Pedal-operated dry single-plate clutch | Single dry clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 2.0 gpm · 7.5 L/min | 3.7 gpm · 14.0 L/min | +87% C 220 |
| Rear PTO speeds declared | 540 rpm | 1260 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,017 lb · 915 kg | 3,020 lb · 1,370 kg | +50% C 220 |
| Maximum permissible mass declared | — | 3,638–4,409 lb · 1,650–2,000 kg | — |
| Wheelbase declared | 66.9 in · 1,699 mm | 77.2 in · 1,960 mm | +15% C 220 |
| Length declared | 102.4 in · 2,601 mm | 122.0 in · 3,100 mm | +19% C 220 |
| Width declared | 47.4–75.2 in · 1,203–1,911 mm | 63.0–73.2 in · 1,600–1,860 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 15.7 in · 400 mm | +14% 211 R (A) |
| Turning radius, braked declared | 9.0 ft · 2.75 m | 8.9 ft · 2.70 m | — |
| Fuel tank declared | 41.2 qt · 39.0 L | 47.6 qt · 45 L | +15% C 220 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 211 R (A) sources
- Source: Traktorenlexikon, “Fiat 211 R/241 R”
Hanomag C 220 sources
- Source: Traktorenlexikon, “Hanomag C 220”
- Source: Traktorenlexikon, “Hanomag C 218”