10 material differences · fewer than 12
Tractor oneFiat 180-90 (DT)1984–1994No measured PTO figureTractor twoMassey Ferguson MF 36801989–1990No measured PTO figure
Which should you choose?
Read our verdict on the 180-90 (DT) and the MF 3680 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 180-90 (DT) | MF 3680 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 177.7 hp | 177.7 hp | — |
| Engine declared | FIAT-IVECO 8365.25.502 | Valmet 612 DS | differs |
| Displacement declared | 8.10 L | 7.37 L | +10% 180-90 (DT) |
| Maximum torque declared | 459 lb·ft · 622 N·m | 476 lb·ft · 645 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal-operated hydraulic dry LUK double clutch | pedal operated dry air cooled double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 13.4 gpm · 50.8 L/min | 14.9 gpm · 56.3 L/min | +11% MF 3680 |
| Pressure declared | 3,046–3,118 psi · 210–215 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,955 lb · 6,330 kg | 12,785 lb · 5,799 kg | +9% 180-90 (DT) |
| Maximum permissible mass declared | 22,046 lb · 10,000 kg | — | — |
| Wheelbase declared | 116.7 in · 2,963 mm | 115.7 in · 2,940 mm | — |
| Length declared | 189.8 in · 4,820 mm | 203.3 in · 5,165 mm | +7% MF 3680 |
| Width declared | 80.7–108.3 in · 2,050–2,750 mm | 94.1 in · 2,391 mm | differs |
| Ground clearance declared | 27.4 in · 695 mm | 17.0 in · 433 mm | +61% 180-90 (DT) |
| Turning radius, braked declared | 13.2 ft · 4.03 m | — | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 274.7–332.9 qt · 260.0–315.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 180-90 (DT) sources
- Source: Traktorenlexikon, “Fiatagri 180-90 DT”
Massey Ferguson MF 3680 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3680”