Fiat 1580 (DT) vs Hürlimann H-6160 A

8 material differences · fewer than 12

Tractor one

1979–1984

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 1580 (DT) and the H-6160 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat 1580 (DT) and Hürlimann H-6160 A, field by field
Field	1580 (DT)	H-6160 A	Gap
Engine
Engine power, claimed claimed	153.0 hp	155.7 hp	—
Engine declared	FIAT-IVECO 8365.25.500 or 8365.05.501	Hürlimann H-1106/15-Turbo	differs
Displacement declared	8.10 L	6.84 L	+18% 1580 (DT)
Maximum torque declared	423–456 lb·ft · 573–618 N·m	471 lb·ft · 638 N·m	differs
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated Ferodo or LuK single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	14.7 gpm · 55.8 L/min	15.3 gpm · 58.0 L/min	—
Pressure declared	3,336–3,481 psi · 230–240 bar	2,277 psi · 157 bar	differs
Three-point lift at ends declared	10,878 lb · 4,934 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,330 lb · 6,500 kg	14,220 lb · 6,450 kg	—
Maximum permissible mass declared	22,046 lb · 10,000 kg	20,503 lb · 9,300 kg	+8% 1580 (DT)
Wheelbase declared	116.7 in · 2,963 mm	112.5 in · 2,857 mm	—
Length declared	170.3 in · 4,325 mm	175.2 in · 4,450 mm	—
Width declared	92.9 in · 2,360 mm	92.5 in · 2,350 mm	—
Height declared	109.6 in · 2,785 mm	115.0 in · 2,920 mm	—
Ground clearance declared	27.4 in · 695 mm	19.3 in · 490 mm	+42% 1580 (DT)
Turning radius, braked declared	15.1 ft · 4.60 m	—	—
Fuel tank declared	190.2 qt · 180.0 L	253.6 qt · 240.0 L	+33% H-6160 A

Source

Source