Fiat 140-90 (DT) vs Massey Ferguson MF 1132

8 material differences · fewer than 12

Tractor one

1984–1993

No measured PTO figure

Tractor two

1977–1982

No measured PTO figure

Which should you choose?

Read our verdict on the 140-90 (DT) and the MF 1132 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat 140-90 (DT) and Massey Ferguson MF 1132, field by field
Field	140-90 (DT)	MF 1132	Gap
Engine
Engine power, claimed claimed	138 hp	131.3 hp	—
Engine declared	FIAT-IVECO 8065.25.000	Eicher EDK 6-5	differs
Displacement declared	5.86 L	5.89 L	—
Maximum torque declared	343 lb·ft · 465 N·m	332 lb·ft · 450 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	13.4 gpm · 50.8 L/min	11.9 gpm · 45.0 L/min	+13% 140-90 (DT)
Three-point lift at ends declared	—	6,173 lb · 2,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,809 lb · 5,810 kg	12,919 lb · 5,860 kg	—
Maximum permissible mass declared	19,842 lb · 9,000 kg	16,535 lb · 7,500 kg	+20% 140-90 (DT)
Wheelbase declared	108.3 in · 2,750 mm	107.5 in · 2,730 mm	—
Length declared	180.3 in · 4,580 mm	181.5 in · 4,610 mm	—
Width declared	80.7 in · 2,050 mm	91.7 in · 2,330 mm	+14% MF 1132
Height declared	111.8 in · 2,840 mm	107.1 in · 2,720 mm	—
Ground clearance declared	26.2 in · 665 mm	17.1 in · 435 mm	+53% 140-90 (DT)
Turning radius, braked declared	12.9 ft · 3.93 m	17.7 ft · 5.40 m	+37% MF 1132
Fuel tank declared	190.2 qt · 180.0 L	262.1 qt · 248.0 L	+38% MF 1132

Source

Source