Fiat 140-90 (DT) vs John Deere 7610
12 material differences
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both; the drive differs (Two-wheel or four-wheel drive; 4WD); they were not built in overlapping years (1984–1993; 1997–2002). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 140-90 (DT) | 7610 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | — | 126.9 hp | — |
| Drawbar power, measured measured | — | 114.0 hp | — |
| Engine | |||
| Engine power, claimed claimed | 138 hp | — | — |
| Engine declared | FIAT-IVECO 8065.25.000 | John Deere 6068TRW72 | differs |
| Displacement declared | 5.86 L | 6.79 L | +16% 7610 |
| Maximum torque declared | 343 lb·ft · 465 N·m | 420 lb·ft · 569.0 N·m | +22% 7610 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–31.1 mph · 30–50 km/h | differs |
| Clutch declared | — | Pedal-operated hydraulic wet John Deere multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Closed centre | differs |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 13.4 gpm · 50.8 L/min | 26.9 gpm · 102.0 L/min | +101% 7610 |
| Pressure declared | — | 2,538 psi · 175 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,809 lb · 5,810 kg | 13,653–14,480 lb · 6,193–6,568 kg | differs |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | 25,353 lb · 11,500 kg | +28% 7610 |
| Wheelbase declared | 108.3 in · 2,750 mm | 110.2–114.2 in · 2,800–2,900 mm | differs |
| Length declared | 180.3 in · 4,580 mm | 187.2 in · 4,755 mm | — |
| Width declared | 80.7 in · 2,050 mm | 118.7 in · 3,015 mm | +47% 7610 |
| Height declared | 111.8 in · 2,840 mm | 117.0 in · 2,973 mm | — |
| Ground clearance declared | 26.2 in · 665 mm | 18.3 in · 465 mm | +43% 140-90 (DT) |
| Turning radius, braked declared | 12.9 ft · 3.93 m | — | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 259.9 qt · 246 L | +37% 7610 |
Fiat 140-90 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 140-90 DT”
John Deere 7610 sources
Source
- Source: OECD test report 1961, 2001
- Source: Traktorenlexikon, “John Deere 7610”