Fiat 1380 (DT) or SOMECA 1380 (TD)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 1380 (DT) and SOMECA 1380 (TD), with the call on each
Question1380 (DT)1380 (TD)Call
Which puts more power through the PTO shaft?99.4 kW (133.3 hp)Traktorenlexikon, “Fiat 1380 (DT)”99.3 kW (133.2 hp)Traktorenlexikon, “Someca 1380”Not comparableNot comparable on power at the PTO shaft: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 1380 (DT) and the 1380 (TD).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 1380 (DT) and the 1380 (TD).
Which pumps more oil for implements?53.5 L/min (14.1 gpm)Traktorenlexikon, “Fiat 1380 (DT)”53.5 L/min (14.1 gpm)Traktorenlexikon, “Someca 1380”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?4,934 kg (10,878 lb)Traktorenlexikon, “Fiat 1380 (DT)”4,934 kg (10,878 lb)Traktorenlexikon, “Someca 1380”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?4,875 kg (10,748 lb)Traktorenlexikon, “Fiat 1380 (DT)”4,875 kg (10,748 lb)Traktorenlexikon, “Someca 1380”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,650 kg (19,070 lb)Traktorenlexikon, “Fiat 1380 (DT)”8,650 kg (19,070 lb)Traktorenlexikon, “Someca 1380”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiat 1380 (DT)”12 to 24Traktorenlexikon, “Someca 1380”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 1380 (DT) and the 1380 (TD).
Which is faster on the road?25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 1380 (DT)”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Someca 1380”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 1380 (DT)”1000 rpmTraktorenlexikon, “Someca 1380”AheadThe Fiat 1380 (DT) offers 540 rpm at the PTO, which the SOMECA 1380 (TD) does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 1380 (DT)”—No figureNo call on PTO independence: not stated for the 1380 (TD).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1380 (DT)”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 1380”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1979–19841979–1983EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 1380 (DT) offers 540 rpm at the PTO, which the SOMECA 1380 (TD) does not (as stated by the sources).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources