4 material differences · fewer than 12
Tractor oneFiat 1380 (DT)1979–1984No measured PTO figureTractor twoSOMECA 1380 (TD)1979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 1380 (DT) and the 1380 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | 1380 (DT) | 1380 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 133.2 hp | — |
| Engine declared | FIAT-IVECO 8065.24.000 | FIAT-IVECO 8065.24.000 | — |
| Displacement declared | 5.50 L | 5.50 L | — |
| Maximum torque declared | 317 lb·ft · 430 N·m | 347 lb·ft · 470 N·m | +9% 1380 (TD) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5–18.6 mph · 25–30 km/h | — |
| Clutch declared | — | Pedal operated Ferodo or LuK single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 14.1 gpm · 53.5 L/min | 14.1 gpm · 53.5 L/min | — |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | 3,263–3,408 psi · 225–235 bar | — |
| Three-point lift, at the coupling points declared | 10,878 lb · 4,934 kg | 10,878 lb · 4,934 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,748 lb · 4,875 kg | 10,748 lb · 4,875 kg | — |
| Maximum permissible mass declared | 19,070 lb · 8,650 kg | 19,070 lb · 8,650 kg | — |
| Wheelbase declared | 108.3 in · 2,750 mm | 108.3 in · 2,750 mm | — |
| Length declared | 162.8 in · 4,135 mm | 162.8 in · 4,135 mm | — |
| Width declared | 78.0 in · 1,980 mm | 85.0–108.7 in · 2,160–2,760 mm | differs |
| Ground clearance declared | 26.2 in · 665 mm | 26.2 in · 665 mm | — |
| Turning radius, braked declared | 13.9 ft · 4.25 m | 13.9 ft · 4.25 m | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 295.9 qt · 280.0 L | +56% 1380 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1380 (DT) sources
- Source: Traktorenlexikon, “Fiat 1380 (DT)”
SOMECA 1380 (TD) sources
- Source: Traktorenlexikon, “Someca 1380”
- Source: Traktorenlexikon, “Fiat 1380 (DT)”