Fiat 1380 (DT) or Massey Ferguson MF 1134 (A)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 1134 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1380 (DT) | MF 1134 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 99.4 kW (133.3 hp)Traktorenlexikon, “Fiat 1380 (DT)” | 99.4 kW (133.3 hp)Traktorenlexikon, “Massey Ferguson MF 1134” | Not comparableNot comparable on power at the PTO shaft: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 1134 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1380 (DT) and the MF 1134 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1380 (DT) and the MF 1134 (A). |
| Which pumps more oil for implements? | 53.5 L/min (14.1 gpm)Traktorenlexikon, “Fiat 1380 (DT)” | 58.5 L/min (15.5 gpm)Traktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 4,934 kg (10,878 lb)Traktorenlexikon, “Fiat 1380 (DT)” | 5,400 kg (11,905 lb)Traktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 4,875 kg (10,748 lb)Traktorenlexikon, “Fiat 1380 (DT)” | 5,050 kg (11,133 lb)Traktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 8,650 kg (19,070 lb)Traktorenlexikon, “Fiat 1380 (DT)” | — | No figureNo call on maximum permissible mass: no figure on record for the MF 1134 (A). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “Fiat 1380 (DT)” | 12Traktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1380 (DT) and the MF 1134 (A). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 1380 (DT)” | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiat 1380 (DT)” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 1380 (DT)” | independentTraktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 1380 (DT)” | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 1134” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1979–1984 | 1978–1990 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 1380 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 1134 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources