10 material differences · fewer than 12
Tractor oneFiat 1380 (DT)1979–1984No measured PTO figureTractor twoMassey Ferguson MF 1134 (A)1978–1990No measured PTO figure
Which should you choose?
Read our verdict on the 1380 (DT) and the MF 1134 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 1380 (DT) | MF 1134 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 133.3 hp | — |
| Engine declared | FIAT-IVECO 8065.24.000 | Perkins AT 6.354.4 | differs |
| Displacement declared | 5.50 L | 5.80 L | +5% MF 1134 (A) |
| Maximum torque declared | 317 lb·ft · 430 N·m | 344 lb·ft · 466 N·m | +8% MF 1134 (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | Pedal-operated dry Luk double clutch with 330 mm diameter | — |
| Hydraulics & hitch | |||
| Pump flow declared | 14.1 gpm · 53.5 L/min | 15.5 gpm · 58.5 L/min | +9% MF 1134 (A) |
| Pressure declared | 3,336–3,481 psi · 230–240 bar | 2,368 psi · 163.3 bar | differs |
| Three-point lift, at the coupling points declared | 10,878 lb · 4,934 kg | 11,905 lb · 5,400 kg | +9% MF 1134 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,748 lb · 4,875 kg | 11,133 lb · 5,050 kg | — |
| Maximum permissible mass declared | 19,070 lb · 8,650 kg | — | — |
| Wheelbase declared | 108.3 in · 2,750 mm | 111.8 in · 2,840 mm | — |
| Length declared | 162.8 in · 4,135 mm | 185.0 in · 4,700 mm | +14% MF 1134 (A) |
| Width declared | 78.0 in · 1,980 mm | 98.4 in · 2,500 mm | +26% MF 1134 (A) |
| Ground clearance declared | 26.2 in · 665 mm | — | — |
| Turning radius, braked declared | 13.9 ft · 4.25 m | — | — |
| Fuel tank declared | 190.2 qt · 180.0 L | 206.1 qt · 195.0 L | +8% MF 1134 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1380 (DT) sources
- Source: Traktorenlexikon, “Fiat 1380 (DT)”
Massey Ferguson MF 1134 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”