8 material differences · fewer than 12
Tractor oneFiat 1300 Super (DT)1976–1979No measured PTO figureTractor twoInternational Harvester 50881981–1985No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (60%); they were not built in overlapping years (1976–1979; 1981–1985). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 1300 Super (DT) | 5088 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 148.0 hp | 136.1 hp | +9% 1300 Super (DT) |
| Engine declared | OM CP 3-100/Var. 17/300 | INTERNATIONAL HARVESTER DT-436 B | differs |
| Displacement declared | 7.41 L | 7.15 L | — |
| Maximum torque declared | 363 lb·ft · 492 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 5088 |
| Clutch declared | dry Ferodo single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.0 gpm · 45.5 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,987 lb · 4,530 kg | 16,010 lb · 7,262 kg | +60% 5088 |
| Wheelbase declared | 108.3 in · 2,750 mm | 111.6 in · 2,835 mm | — |
| Length declared | 175.2 in · 4,450 mm | 196.6 in · 4,994 mm | +12% 5088 |
| Width declared | 85.0–108.7 in · 2,160–2,760 mm | 112.0 in · 2,845 mm | differs |
| Ground clearance declared | 15.7 in · 400 mm | 17.2 in · 437 mm | +9% 5088 |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 12.1 ft · 3.70 m | +19% 1300 Super (DT) |
| Fuel tank declared | 211.3 qt · 200.0 L | 280.0 qt · 265.0 L | +33% 5088 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 1300 Super (DT) sources
- Source: Traktorenlexikon, “Fiat 1300 DT Super”
International Harvester 5088 sources
- Source: Traktorenlexikon, “IHC 5088”