Fiat 110-90 (DT) vs Hürlimann H-5110 (A)

9 material differences · fewer than 12

Tractor one

1986–2003

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 110-90 (DT) and the H-5110 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat 110-90 (DT) and Hürlimann H-5110 (A), field by field
Field	110-90 (DT)	H-5110 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	108.5 hp	—
Engine declared	FIAT-IVECO 8065.05	Hürlimann H-1105/10 or H-1105/10-Turbo	differs
Displacement declared	5.86 L	5.70 L	—
Maximum torque declared	258 lb·ft · 350 N·m	292 lb·ft · 396 N·m	+13% H-5110 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	—	Pedal operated dry SAME single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.1 gpm · 57.0 L/min	—	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	10,002 lb · 4,537 kg	8,543 lb · 3,875 kg	+17% 110-90 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,436 lb · 4,280 kg	9,480–10,582 lb · 4,300–4,800 kg	differs
Maximum permissible mass declared	14,330 lb · 6,500 kg	16,094 lb · 7,300 kg	+12% H-5110 (A)
Wheelbase declared	101.7 in · 2,584 mm	102.6–103.9 in · 2,607–2,640 mm	—
Length declared	178.9 in · 4,544 mm	172.4 in · 4,380 mm	—
Width declared	77.6 in · 1,970 mm	81.5 in · 2,070 mm	—
Height declared	103.3 in · 2,625 mm	112.2 in · 2,850 mm	+9% H-5110 (A)
Ground clearance declared	18.9 in · 481 mm	17.7 in · 450 mm	+7% 110-90 (DT)
Turning radius, braked declared	12.5 ft · 3.82 m	—	—
Fuel tank declared	140.5 qt · 133.0 L	169.1 qt · 160.0 L	+20% H-5110 (A)

Source

Source