Fiat 1000 Super (DT) vs VALMET 903/903-4

11 material differences · fewer than 12

Tractor one

1976–1979

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 1000 Super (DT) and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 1000 Super (DT) and VALMET 903/903-4, field by field
Field	1000 Super (DT)	903/903-4	Gap
Engine
Engine power, claimed claimed	109 hp	92.7 hp	+17% 1000 Super (DT)
Engine declared	Fiat 8065.04.207	VALMET 411 CS	differs
Displacement declared	5.50 L	4.40 L	+25% 1000 Super (DT)
Maximum torque declared	269 lb·ft · 365 N·m	236 lb·ft · 320 N·m	+14% 1000 Super (DT)
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Ferodo double clutch with separate PTO clutch	—	—
Hydraulics & hitch
Pump flow declared	8.2 gpm · 31.0 L/min	11.4 gpm · 43.0 L/min	+39% 903/903-4
Pressure declared	2,901 psi · 200 bar	—	—
Three-point lift at ends declared	6,614 lb · 3,000 kg	6,393 lb · 2,900 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,981 lb · 3,620 kg	8,047 lb · 3,650 kg	—
Maximum permissible mass declared	14,065 lb · 6,380 kg	—	—
Wheelbase declared	97.6 in · 2,480 mm	91.7 in · 2,330 mm	+6% 1000 Super (DT)
Length declared	164.6 in · 4,180 mm	153.7 in · 3,905 mm	+7% 1000 Super (DT)
Width declared	79.1 in · 2,010 mm	77.6 in · 1,972 mm	—
Height declared	102.4 in · 2,600 mm	98.4 in · 2,499 mm	—
Ground clearance declared	22.8 in · 580 mm	18.1 in · 460 mm	+26% 1000 Super (DT)
Turning radius, braked declared	14.3 ft · 4.35 m	12.5 ft · 3.82 m	+14% 1000 Super (DT)
Fuel tank declared	121.5 qt · 115.0 L	95.1 qt · 90.0 L	+28% 1000 Super (DT)

Source

Source