Fiat 1000 (DT) vs VALMET 1102 (-4)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1000 (DT) and the 1102 (-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1000 (DT) | 1102 (-4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.7 hp | 100.6 hp | — |
| Engine declared | FIAT-IVECO 8065.02.007 | VALMET 411 BS or 411 CS | differs |
| Displacement declared | 5.18 L | — | — |
| Maximum torque declared | 226 lb·ft · 306 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry FERODO double clutch with separate PTO control | dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.3 gpm · 46.5 L/min | 9.2 gpm · 35.0 L/min | +33% 1000 (DT) |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Three-point lift at ends declared | 5,975 lb · 2,710 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,771 lb · 3,525 kg | 8,598 lb · 3,900 kg | +11% 1102 (-4) |
| Wheelbase declared | 97.6 in · 2,480 mm | 91.3 in · 2,320 mm | +7% 1000 (DT) |
| Length declared | 164.6 in · 4,180 mm | 154.7 in · 3,930 mm | +6% 1000 (DT) |
| Width declared | 79.1 in · 2,010 mm | 78.0 in · 1,980 mm | — |
| Height declared | 102.4 in · 2,600 mm | 106.7 in · 2,710 mm | — |
| Ground clearance declared | 22.8 in · 580 mm | 20.5 in · 520 mm | +12% 1000 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.81 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 124.7 qt · 118.0 L | 102.5 qt · 97.0 L | +22% 1000 (DT) |
Fiat 1000 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 1000/1000 DT”
VALMET 1102 (-4) sources
Source
- Source: Traktorenlexikon, “Valmet 1102”