12 material differences
Tractor oneFiat 100-90 (DT)1984–1992No measured PTO figureTractor twoInternational Harvester 10551977–1982No measured PTO figure
Which should you choose?
Read our verdict on the 100-90 (DT) and the 1055 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 100-90 (DT) | 1055 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.7 hp | 99 hp | — |
| Engine declared | FIAT-IVECO 8065.06.200 or 300 | IH D-358 | differs |
| Displacement declared | 5.42 L | 5.87 L | +8% 1055 |
| Maximum torque declared | 226 lb·ft · 306 N·m | 281 lb·ft · 381 N·m | +25% 1055 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | Dry double clutch by Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | 12.8 gpm · 48.4 L/min | 10.5 gpm · 39.9 L/min | +21% 100-90 (DT) |
| Pressure declared | 3,046–3,118 psi · 210–215 bar | 2,466 psi · 170 bar | differs |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,962 lb · 4,065 kg | 9,458 lb · 4,290 kg | +6% 1055 |
| Maximum permissible mass declared | 13,448 lb · 6,100 kg | — | — |
| Wheelbase declared | 102.1 in · 2,594 mm | 103.4 in · 2,626 mm | — |
| Length declared | 178.9 in · 4,544 mm | 165.1 in · 4,194 mm | +8% 100-90 (DT) |
| Width declared | 77.6–105.1 in · 1,970–2,670 mm | 80.7 in · 2,049 mm | differs |
| Ground clearance declared | 22.0 in · 560 mm | 20.3 in · 516 mm | +9% 100-90 (DT) |
| Turning radius, braked declared | 12.5 ft · 3.82 m | 14.4 ft · 4.40 m | +15% 1055 |
| Fuel tank declared | 98.3 qt · 93.0 L | 147.9 qt · 140 L | +51% 1055 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 100-90 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 100-90 DT”
International Harvester 1055 sources
Source
- Source: Traktorenlexikon, “IHC 1055”
- Source: Traktorenlexikon, “IHC 1055 XL”