11 material differences · fewer than 12
Tractor oneFendt Xylon 3201990No measured PTO figureTractor twoVALMET 81001990–1996No measured PTO figure
Which should you choose?
Read our verdict on the Xylon 320 and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Xylon 320 | 8100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118 hp | 118.4 hp | — |
| Engine declared | Deutz F6L 912 H | VALMET 620 D | differs |
| Displacement declared | 6.13 L | 6.59 L | +8% 8100 |
| Maximum torque declared | 287 lb·ft · 389 N·m | 311 lb·ft · 421 N·m | +8% 8100 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry Fichtel & Sachs single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 17.8 gpm · 67.4 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,081 lb · 5,480 kg | 10,141 lb · 4,600 kg | +19% Xylon 320 |
| Maximum permissible mass declared | — | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 115.2 in · 2,925 mm | 100.7 in · 2,558 mm | +14% Xylon 320 |
| Length declared | 189.6 in · 4,816 mm | 186.8 in · 4,745 mm | — |
| Width declared | 90.4 in · 2,295 mm | 86.6–103.9 in · 2,200–2,640 mm | differs |
| Ground clearance declared | 25.6 in · 650 mm | 18.7 in · 475 mm | +37% Xylon 320 |
| Turning radius, braked declared | 19.0 ft · 5.80 m | 15.5 ft · 4.71 m | +23% Xylon 320 |
| Fuel tank declared | 253.6 qt · 240 L | 174.4 qt · 165.0 L | +45% Xylon 320 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Xylon 320 sources
- Source: Traktorenlexikon, “Fendt Xylon 320”
VALMET 8100 sources
- Source: Traktorenlexikon, “Valmet 8100”
- Source: Traktorenlexikon, “Valmet 8000”