8 material differences · fewer than 12
Tractor oneFendt Favorit 926 Vario1996–2002No measured PTO figureTractor twoJohn Deere 84001994–1998No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 926 Vario and the 8400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Favorit 926 Vario | 8400 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 256 hp | 256.7 hp | — |
| Engine declared | MAN D 0826 LE 531 | John Deere-PowerTech 6.081 HRW-01 | differs |
| Displacement declared | 6.87 L | 8.12 L | +18% 8400 |
| Maximum torque declared | 807 lb·ft · 1,094 N·m | 777 lb·ft · 1,054 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 23.6 mph · 38 km/h | +32% Favorit 926 Vario |
| Clutch declared | — | Pedal-operated hydraulic-wet John Deere multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 26.9 gpm · 102.0 L/min | — | — |
| Pressure declared | 2,915 psi · 201 bar | — | — |
| Rear PTO speeds declared | 750 rpm / 1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 18,188 lb · 8,250 kg | 19,191 lb · 8,705 kg | +6% 8400 |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 111.8 in · 2,840 mm | — | — |
| Length declared | 194.5 in · 4,940 mm | 214.4 in · 5,447 mm | +10% 8400 |
| Width declared | 102.0 in · 2,590 mm | 118.6–130.4 in · 3,012–3,312 mm | differs |
| Ground clearance declared | 23.8 in · 605 mm | 15.9 in · 405 mm | +49% Favorit 926 Vario |
| Turning radius, braked declared | 16.7 ft · 5.10 m | — | — |
| Fuel tank declared | — | 541.0 qt · 512.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 926 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 926 Vario”
John Deere 8400 sources
- Source: Traktorenlexikon, “John Deere 8400”