10 material differences · fewer than 12

Tractor oneFendt Favorit 824 LSE1993–2004No measured PTO figureTractor twoRenault Atles 926 RZ2001–2004No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 824 LSE and the Atles 926 RZ → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

10 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 824 LSE and Renault Atles 926 RZ, field by field
FieldFavorit 824 LSEAtles 926 RZGap
Engine
Engine power, claimed claimed227 hp223.0 hp—
Engine declaredMAN D 0826 LE 523Deutz BF6M 1013 FCdiffers
Displacement declared6.87 L7.15 L—
Maximum torque declared698 lb·ft · 947 N·m619 lb·ft · 839.6 N·m+13% Favorit 824 LSE
Transmission
Top speed declared31.1 mph · 50 km/h24.9 mph · 40 km/h+25% Favorit 824 LSE
Clutch declaredwet multi-plate driving clutch——
Hydraulics & hitch
Hydraulic centre declared—Closed centre—
Hydraulic control declaredLoad sensing——
Pump flow declared26.9 gpm · 102.0 L/min——
Pressure declared—3,408 psi · 235 bar—
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared17,196–18,188 lb · 7,800–8,250 kg21,363 lb · 9,690 kgdiffers
Maximum permissible mass declared26,455 lb · 12,000 kg27,227 lb · 12,350 kg—
Wheelbase declared111.8 in · 2,840 mm119.5 in · 3,035 mm+7% Atles 926 RZ
Length declared194.5 in · 4,940 mm261.5 in · 6,641 mm+34% Atles 926 RZ
Width declared102.0 in · 2,590 mm100.4–115.4 in · 2,550–2,930 mmdiffers
Ground clearance declared23.8 in · 605 mm25.8 in · 655 mm+8% Atles 926 RZ
Turning radius, braked declared17.7 ft · 5.40 m17.7 ft · 5.40 m—
Fuel tank declared391.0 qt · 370 L480.8 qt · 455.0 L+23% Atles 926 RZ

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 824 LSE sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 824”

Renault Atles 926 RZ sources

Source
  • Source: Traktorenlexikon, “Renault Atles 926 RZ”
  • Source: Traktorenlexikon, “Renault Atles 935 RZ”
  • Source: OECD test report 2154, 2004
  • Source: OECD test report 2154, 2004