12 material differences

Tractor oneFendt Favorit 822 LSE1993–2004No measured PTO figureTractor twoNew Holland 8870 A1993–2002No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 822 LSE and the 8870 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fendt Favorit 822 LSE and New Holland 8870 A, field by field
FieldFavorit 822 LSE8870 AGap
Engine
Engine power, claimed claimed207 hp207.2 hp—
Engine declaredMAN D 0826 LE 522NEW HOLLAND VA 456 CID TC/ACdiffers
Displacement declared6.87 L7.48 L+9% 8870 A
Maximum torque declared661 lb·ft · 896 N·m721 lb·ft · 978 N·m+9% 8870 A
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h24.9 mph · 40 km/hdiffers
Clutch declaredWet multi-disc clutch as driving clutchWet multi-plate Funk clutch running in oil bathdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensingLoad sensing—
Pump flow declared27.6 gpm · 104.4 L/min27.4 gpm · 103.9 L/min—
Pressure declared—2,495 psi · 172 bar—
Rear PTO speeds declared750 rpm / 1000 rpm1000 rpmdiffers
Weight & dimensions
Unladen weight declared16,954 lb · 7,690 kg19,147 lb · 8,685 kg+13% 8870 A
Maximum permissible mass declared26,455 lb · 12,000 kg30,093 lb · 13,650 kg+14% 8870 A
Wheelbase declared111.8 in · 2,840 mm118.3 in · 3,005 mm+6% 8870 A
Length declared194.5 in · 4,940 mm223.2 in · 5,669 mm+15% 8870 A
Width declared100.4 in · 2,550 mm100.8 in · 2,560 mm—
Ground clearance declared23.8 in · 605 mm20.0 in · 509 mm+19% Favorit 822 LSE
Turning radius, braked declared17.7 ft · 5.40 m——
Fuel tank declared391.0 qt · 370 L439.6 qt · 416.0 L+12% 8870 A

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 822 LSE sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 822”

New Holland 8870 A sources

Source
  • Source: Traktorenlexikon, “New Holland 8870 A”