13 material differences
Tractor oneFendt Favorit 716 Variofrom 1998No measured PTO figureTractor twoFiat M 1601996–1999No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 716 Vario and the M 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Favorit 716 Vario | M 160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 158 hp | 158.0 hp | — |
| Engine declared | Deutz AG BF6M 2013 C | New Holland 675 T-WM | differs |
| Displacement declared | 5.70 L | 7.48 L | +31% M 160 |
| Maximum torque declared | 558 lb·ft · 757.0 N·m | 481 lb·ft · 652 N·m | +16% Favorit 716 Vario |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Multi-plate clutch | Electro-hydraulically operated running in oil New Holland multi-disc driving clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 29.1 gpm · 110 L/min | 26.0 gpm · 98.4 L/min | +12% Favorit 716 Vario |
| Pressure declared | 2,901 psi · 200 bar | 2,408–2,582 psi · 166–178 bar | differs |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,787–14,451 lb · 5,800–6,555 kg | 13,404 lb · 6,080 kg | differs |
| Maximum permissible mass declared | 24,251 lb · 11,000 kg | 20,944 lb · 9,500 kg | +16% Favorit 716 Vario |
| Wheelbase declared | 106.3 in · 2,700 mm | 107.2 in · 2,723 mm | — |
| Length declared | 182.7–183.2 in · 4,640–4,653 mm | 183.3 in · 4,655 mm | — |
| Width declared | 101.2–102.0 in · 2,570–2,590 mm | 84.1–109.1 in · 2,135–2,771 mm | differs |
| Ground clearance declared | 22.7 in · 576 mm | 14.5 in · 369 mm | +56% Favorit 716 Vario |
| Turning radius, braked declared | 16.1 ft · 4.90 m | — | — |
| Fuel tank declared | 322.3 qt · 305 L | 232.5 qt · 220.0 L | +39% Favorit 716 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 716 Vario sources
Source
- Source: Traktorenlexikon, “Fendt Favorit 716 Vario”
- Source: OECD test report 1884, 2000
Fiat M 160 sources
Source
- Source: Traktorenlexikon, “Fiatagri M160”
- Source: Traktorenlexikon, “New Holland 8560”