12 material differences

Tractor oneFendt Favorit 714 Variofrom 1998No measured PTO figureTractor twoNew Holland TM 150 (Traktorenlexikon)1999–2002No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 714 Vario and the TM 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fendt Favorit 714 Vario and New Holland TM 150 (Traktorenlexikon), field by field
FieldFavorit 714 VarioTM 150Gap
Engine
Engine power, claimed claimed138 hp138 hp—
Engine declaredDeutz BF6M 2013 CNEW HOLLAND 675-T/WVdiffers
Displacement declared5.70 L7.48 L+31% TM 150
Maximum torque declared—439 lb·ft · 595 N·m—
Transmission
Top speed declared31.1 mph · 50 km/h24.9 mph · 40 km/h+25% Favorit 714 Vario
Clutch declaredMulti-disc clutchElectro-hydraulic oil-immersed multi-plate drive clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensing——
Pump flow declared29.3 gpm · 111.0 L/min31.2 gpm · 118.2 L/min+6% TM 150
Pressure declared2,683 psi · 185 bar2,466 psi · 170 bar+9% Favorit 714 Vario
Rear PTO speeds declared540/750/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,677–14,451 lb · 5,750–6,555 kg13,962 lb · 6,333 kgdiffers
Maximum permissible mass declared24,251 lb · 11,000 kg22,046 lb · 10,000 kg+10% Favorit 714 Vario
Wheelbase declared106.3 in · 2,700 mm107.2 in · 2,723 mm—
Length declared182.7–183.2 in · 4,640–4,653 mm185.2 in · 4,705 mm—
Width declared100.4–102.0 in · 2,550–2,590 mm86.0–109.6 in · 2,184–2,784 mmdiffers
Ground clearance declared22.7 in · 576 mm15.4 in · 390 mm+48% Favorit 714 Vario
Turning radius, braked declared16.1 ft · 4.90 m19.2 ft · 5.85 m+19% TM 150
Fuel tank declared—343.4 qt · 325.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 714 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”

New Holland TM 150 (Traktorenlexikon) sources

Source
  • Source: Traktorenlexikon, “New Holland TM150”