7 material differences · fewer than 12
Tractor oneFendt 611 LS/LSA1977–1985No measured PTO figureTractor twoHürlimann D 8001964–1970No measured PTO figure
Which should you choose?
Read our verdict on the 611 LS/LSA and the D 800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 611 LS/LSA | D 800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103.1 hp | 92.7 hp | +11% 611 LS/LSA |
| Engine declared | MWM D 226.6.2 | Hürlimann D-800 | differs |
| Displacement declared | 6.24 L | 6.12 L | — |
| Maximum torque declared | — | 271 lb·ft · 368 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 12.4 mph · 20 km/h | differs |
| Clutch declared | Air-cooled single-disc dry clutch from Fichtel & Sachs | Pedal operated dry Huerlimann double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.9 gpm · 45.0 L/min | — | — |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,453 lb · 5,195 kg | 11,574 lb · 5,250 kg | — |
| Wheelbase declared | 105.9–106.9 in · 2,690–2,715 mm | 104.3 in · 2,650 mm | — |
| Length declared | 183.9 in · 4,670 mm | 164.6 in · 4,180 mm | +12% 611 LS/LSA |
| Width declared | 85.2–91.1 in · 2,163–2,315 mm | 81.9 in · 2,080 mm | differs |
| Ground clearance declared | 16.9 in · 430 mm | — | — |
| Turning radius, braked declared | 15.4 ft · 4.70 m | — | — |
| Fuel tank declared | 234.6 qt · 222 L | 126.8 qt · 120.0 L | +85% 611 LS/LSA |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 611 LS/LSA sources
- Source: Traktorenlexikon, “Fendt Favorit 611 LS”
- Source: Traktorenlexikon, “Fendt Favorit 611 LSA”
Hürlimann D 800 sources
- Source: Traktorenlexikon, “Hürlimann D 800”