Fendt Favorit 514 C or Fendt Favorit 714 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Favorit 514 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 714 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fendt Favorit 514 C and Fendt Favorit 714 Vario, with the call on each
QuestionFavorit 514 CFavorit 714 VarioCall
Which puts more power through the PTO shaft?102.5 kW (137.5 hp)Traktorenlexikon, “Fendt Favorit 514 C”103 kW (138 hp)Traktorenlexikon, “Fendt Favorit 714 Vario”Not comparableNot comparable on power at the PTO shaft: the Favorit 514 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 714 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Favorit 514 C and the Favorit 714 Vario.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Favorit 514 C and the Favorit 714 Vario.
Which pumps more oil for implements?102 L/min (26.9 gpm)Traktorenlexikon, “Fendt Favorit 514 C”111.0 L/min (29.3 gpm)Traktorenlexikon, “Fendt Favorit 714 Vario”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?6,885 kg (15,179 lb)Traktorenlexikon, “Fendt Favorit 514 C”No figureNo call on three-point lift: no figure on record for the Favorit 714 Vario.
Which is heavier, for traction?5,540 kg (12,214 lb)Traktorenlexikon, “Fendt Favorit 514 C”5,750 kg (12,677 lb) to 6,555 kg (14,451 lb)Traktorenlexikon, “Fendt Favorit 714 Vario”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?11,000 kg (24,251 lb)Traktorenlexikon, “Fendt Favorit 714 Vario”No figureNo call on maximum permissible mass: no figure on record for the Favorit 514 C.
Which has the wider choice of gears?44 forwardTraktorenlexikon, “Fendt Favorit 514 C”Stepless (CVT)Traktorenlexikon, “Fendt Favorit 714 Vario”DifferTransmissions differ in kind: the Fendt Favorit 514 C has 44 forward gears and the Fendt Favorit 714 Vario is stepless (CVT) — not called.
Which offers a creeper range?YesTraktorenlexikon, “Fendt Favorit 514 C”No figureNo call on a creeper range: not stated for the Favorit 714 Vario.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 514 C”50 km/h (31.1 mph)Traktorenlexikon, “Fendt Favorit 714 Vario”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Fendt Favorit 514 C”540/750/1000 rpmTraktorenlexikon, “Fendt Favorit 714 Vario”AheadThe Fendt Favorit 714 Vario offers 750 rpm at the PTO, which the Fendt Favorit 514 C does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the Favorit 514 C and the Favorit 714 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Fendt Favorit 514 C”4WDTraktorenlexikon, “Fendt Favorit 714 Vario”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–19991998–Ahead (a fact, not an advantage)The Fendt Favorit 714 Vario is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fendt Favorit 714 Vario offers 750 rpm at the PTO, which the Fendt Favorit 514 C does not (as stated by the sources).
  • The Fendt Favorit 714 Vario is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Fendt Favorit 514 C has 44 forward gears and the Fendt Favorit 714 Vario is stepless (CVT) — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Favorit 514 C has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Favorit 714 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources