8 material differences · fewer than 12

Tractor oneFendt Favorit 514 C1993–1999No measured PTO figureTractor twoFendt Favorit 714 Variofrom 1998No measured PTO figure

Which should you choose?

Read our verdict on the Favorit 514 C and the Favorit 714 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 6 fields identical or within 5%, which is not counted as material

Fendt Favorit 514 C and Fendt Favorit 714 Vario, field by field
FieldFavorit 514 CFavorit 714 VarioGap
Engine
Engine power, claimed claimed137.5 hp138 hp—
Engine declaredMWM TD 226 B-6Deutz BF6M 2013 Cdiffers
Displacement declared6.23 L5.70 L+9% Favorit 514 C
Maximum torque declared410 lb·ft · 556 N·m——
Transmission
Top speed declared24.9–31.1 mph · 40–50 km/h31.1 mph · 50 km/hdiffers
Clutch declaredWet multi-plate clutch as driving clutchMulti-disc clutchdiffers
Hydraulics & hitch
Hydraulic control declaredLoad sensingLoad sensing—
Pump flow declared26.9 gpm · 102 L/min29.3 gpm · 111.0 L/min+9% Favorit 714 Vario
Pressure declared—2,683 psi · 185 bar—
Rear PTO speeds declared540 rpm / 1000 rpm540/750/1000 rpmdiffers
Weight & dimensions
Unladen weight declared12,214 lb · 5,540 kg12,677–14,451 lb · 5,750–6,555 kgdiffers
Maximum permissible mass declared—24,251 lb · 11,000 kg—
Wheelbase declared102.7 in · 2,609 mm106.3 in · 2,700 mm—
Length declared176.4 in · 4,480 mm182.7–183.2 in · 4,640–4,653 mm—
Width declared96.1 in · 2,440 mm100.4–102.0 in · 2,550–2,590 mmdiffers
Ground clearance declared22.7 in · 576 mm22.7 in · 576 mm—
Turning radius, braked declared16.1 ft · 4.90 m16.1 ft · 4.90 m—
Fuel tank declared221.9 qt · 210 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fendt Favorit 514 C sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 514 C”
  • Source: Traktorenlexikon, “Fendt Favorit 615 LSA”

Fendt Favorit 714 Vario sources

Source
  • Source: Traktorenlexikon, “Fendt Favorit 714 Vario”