7 material differences · fewer than 12
Tractor oneFendt Farmer 5 S/SA1970–1972No measured PTO figureTractor twoLandini R 8000 Special (TL-15 N)1967–1974No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 5 S/SA and the R 8000 Special (TL-15 N) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | Farmer 5 S/SA | R 8000 Special (TL-15 N) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.8 hp | 63.2 hp | — |
| Engine declared | MWM D 225.4 | Perkins A 4.212 | differs |
| Displacement declared | 3.38 L | 3.47 L | — |
| Maximum torque declared | — | 166 lb·ft · 226 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.7 gpm · 36.6 L/min | 7.3 gpm · 27.8 L/min | +32% Farmer 5 S/SA |
| Pressure declared | 2,489 psi · 172 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,493 lb · 2,945 kg | 5,600 lb · 2,540 kg | +16% Farmer 5 S/SA |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 88.4 in · 2,246 mm | 85.4 in · 2,170 mm | — |
| Length declared | 150.4 in · 3,820 mm | 143.3 in · 3,640 mm | — |
| Width declared | 78.0 in · 1,980 mm | 72.8–92.5 in · 1,850–2,350 mm | differs |
| Ground clearance declared | 16.1 in · 410 mm | 17.3 in · 440 mm | +7% R 8000 Special (TL-15 N) |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 12.3 ft · 3.76 m | — |
| Fuel tank declared | — | 90.9 qt · 86.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 5 S/SA sources
- Source: Traktorenlexikon, “Fendt Farmer 5 S/SA”
- Source: Traktorenlexikon, “Fendt Favorit 3 S/SA”
Landini R 8000 Special (TL-15 N) sources
- Source: Traktorenlexikon, “Landini 8000 Special”
- Source: Traktorenlexikon, “Massey Ferguson MF 165 S”