8 material differences · fewer than 12
Tractor oneFendt Farmer 308 Ci2003–2008No measured PTO figureTractor twoFord 78101988–1991No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 308 Ci and the 7810 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Farmer 308 Ci | 7810 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 97 hp | 96.7 hp | — |
| Engine declared | Deutz BF4M 2012 C | — | — |
| Displacement declared | 4.04 L | — | — |
| Maximum torque declared | 316 lb·ft · 428 N·m | 294 lb·ft · 399 N·m | +7% Farmer 308 Ci |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% Farmer 308 Ci |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 17.6 gpm · 66.5 L/min | 18.2 gpm · 68.9 L/min | — |
| Pressure declared | 2,611 psi · 180 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,488 lb · 3,850 kg | 7,749 lb · 3,515 kg | +10% Farmer 308 Ci |
| Maximum permissible mass declared | 13,228 lb · 6,000 kg | — | — |
| Wheelbase declared | 94.0 in · 2,388 mm | 99.1 in · 2,516 mm | +5% 7810 |
| Length declared | 157.5 in · 4,000 mm | 165.5 in · 4,204 mm | — |
| Width declared | 84.3 in · 2,140 mm | 76.9 in · 1,953 mm | +10% Farmer 308 Ci |
| Ground clearance declared | 18.9 in · 480 mm | 24.0 in · 610 mm | +27% 7810 |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 114.1 qt · 108 L | 188.1 qt · 178.0 L | +65% 7810 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 308 Ci sources
- Source: Traktorenlexikon, “Fendt Farmer 308 Ci”
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron K 120”
Ford 7810 sources
- Source: Traktorenlexikon, “Ford 7810”