Fendt Farmer 260 P/PA (Fendt) vs International Harvester 585

13 material differences

Tractor one

1988–1992

No measured PTO figure

Tractor two

1981–1990

No measured PTO figure

Which should you choose?

Read our verdict on the Farmer 260 P/PA and the 585 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 2 fields identical or within 5%, which is not counted as material

Fendt Farmer 260 P/PA (Fendt) and International Harvester 585, field by field
Field	Farmer 260 P/PA	585	Gap
Engine
Engine power, claimed claimed	59 hp	58.2 hp	—
Engine declared	KHD F3L 913	INTERNATIONAL-HARVESTER D-206	differs
Displacement declared	3.06 L	3.38 L	+10% 585
Maximum torque declared	150 lb·ft · 203 N·m	161 lb·ft · 218 N·m	+7% 585
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Clutch declared	dual dry clutch	Pedal-operated dry LAYCOCK single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	10.8 gpm · 41.0 L/min	—	—
Pressure declared	—	2,698 psi · 186 bar	—
Three-point lift at ends declared	—	4,398 lb · 1,995 kg	—
Rear PTO speeds declared	540/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,159 lb · 2,340 kg	6,393 lb · 2,900 kg	+24% 585
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	80.7 in · 2,050 mm	85.0 in · 2,159 mm	+5% 585
Length declared	138.4 in · 3,516 mm	142.1 in · 3,610 mm	—
Width declared	60.4 in · 1,533 mm	72.8 in · 1,850 mm	+21% 585
Height declared	81.8 in · 2,077 mm	103.1 in · 2,620 mm	+26% 585
Ground clearance declared	10.1 in · 257 mm	14.1 in · 358 mm	+39% 585
Turning radius, braked declared	9.7 ft · 2.95 m	10.7 ft · 3.25 m	+10% 585
Fuel tank declared	63.4 qt · 60 L	118.3 qt · 112.0 L	+87% 585

Source

Source